6/recent/Bmw-posts

BMW 5 Series (E39)


The BMW E39 is the fourth generation of BMW 5 Series, which was manufactured from 1995 to 2004. It was launched in the sedan body style, with the station wagon body style (marketed as "Touring") introduced in 1996. The E39 was replaced by the E60 5 Series in 2003, however E39 Touring models remained in production until May 2004.

The proportion of chassis components using aluminium significantly increased for the E39, and it was the first 5 Series to use aluminium for all major components in the front suspension or any in the rear. It was also the first 5 Series where a four-cylinder diesel engine was available. Rack and pinion steering was used for four- and six-cylinder models, the first time that a 5 Series has used this steering system in significant volumes. Unlike its E34 predecessor and E60 successor, the E39 was not available with all-wheel drive.


The high performance E39 M5 sedan was introduced in 1998, powered by a 4.9 L (299 cu in) DOHC V8 engine. It was the first M5 model to be powered by a V8 engine.

Development and launch
Development for the E34's successor began in 1989,[citation needed] and ended in 1995. The final design by Joji Nagashima was selected in June 1992 and later frozen for production under new design chief Chris Bangle. With design selection in 1992, the series development phase began and took 39 months till start of production. The domestic German design patent was filed on 20 April 1994, with an E39 prototype.

In May 1995 BMW published the first official photos of the E39.The E39 premiered in September 1995 at the Frankfurt Motor Show.In December 1995 sales of sedan models began on the European mainland.Production of wagon/estate models began in November 1996.

Equipment

The E39 was one of the first vehicles (alongside the E38 7 Series) to have curtain airbags, which protect the occupants' heads in a side impact. Standard equipment on the launch models included dual front and side airbags, pretensioners and load limiters for the front seatbelts, anti-lock brakes, traction control, power steering, and air conditioning.Satellite navigation was also available, initially using maps on CD-ROMs, then moving to DVD maps in 2002. Several models were available in Sports or Executive trim levels.

Interior: pre-facelift

Interior: post-facelift (with M-sport steering wheel)

Special options available options on wagon models were either a roller blind or extending cargo cover with patrician net for the rear cargo area, roller sun visors for rear and side windows.

A "latent heat accumulator" was available as an option up until September 1999.The accumulator stores engine heat by converting a salt from solid to liquid form (phase transit The insulated tank can store heat for several days. The next time the vehicle is started, this heat is automatically used to reduce exhaust emissions (by heating the engine up to operating temperature quicker), for cabin heating and window defrosting.

E39 sedan- front

E39 sedan- rear
Separate to the latent heat accumulator is the Residual Heat function (activated by a button labelled "REST"),(p104) which allows the demister and cabin heater to use the heat of an engine that has recently been turned off (using an electric pump to push hot coolant through the heater core).

The E39 was one of the first vehicles (alongside the E38 7 Series) to have curtain airbags, which protect the occupants' heads in a side impact.Standard equipment on the launch models included dual front and side airbags, pretensioners and load limiters for the front seatbelts,anti-lock brakes, traction control, power steering, and air conditioning.Satellite navigation was also available, initially using maps on CD-ROMs, then moving to DVD maps in 2002. Several models were available in Sports or Executive trim levels.
Special options available options on wagon models were either a roller blind or extending cargo cover with patrician net for the rear cargo area, roller sun visors for rear and side windows.

A "latent heat accumulator" was available as an option up until September 1999.The accumulator stores engine heat by converting a salt from solid to liquid form (phase transition). The insulated tank can store heat for several days. The next time the vehicle is started, this heat is automatically used to reduce exhaust emissions (by heating the engine up to operating temperature quicker), for cabin heating and window defrosting.

Separate to the latent heat accumulator is the Residual Heat function (activated by a button labelled "REST"),(p104) which allows the demister and cabin heater to use the heat of an engine that has recently been turned off (using an electric pump to push hot coolant through the heater core).

E39 station wagon- front

E39 station wagon- rear
Engines
Petrol engines

At launch, the petrol engines consisted of the BMW M52 straight-6 and the BMW M62 V8.In late 1998, the "technical update" (TÜ) versions of these engines were introduced, introducing double VANOS to the M52 and single VANOS to the M62, primarily to increase torque at low rpm. For the facelift of the model range in the year 2000, the M52 was replaced by the BMW M54 straight-6 engine, however the M62TÜ remained in use for the V8 models.The M54B30 used in the 530i model topped the Ward's 10 Best Engines list in 2002 and 2003.

BMW M54 straight-6 engine

BMW M62 V8 engine

Specifications for European models are shown below.

ModelYearsEnginePowerTorque
520i1995–1998M52B20
straight-6
110 kW (148 hp)
at 5,900 rpm
190 N⋅m (140 lb⋅ft)
at 4,200 rpm
1998–2000  M52TUB20   
straight-6
110 kW (148 hp)
at 5,900 rpm
190 N⋅m (140 lb⋅ft)
at 3,500 rpm
2000–2003M54B22
straight-6
125 kW (168 hp)
at 6,100 rpm
210 N⋅m (155 lb⋅ft)
at 3,500 rpm
523i1995–1998M52B25
straight-6
125 kW (168 hp)
at 5,500 rpm
245 N⋅m (181 lb⋅ft)
at 3,950 rpm
1998–2000M52TUB25
straight-6
125 kW (168 hp)
at 5,500 rpm
245 N⋅m (181 lb⋅ft)
at 3,500 rpm
525i2000–2003M54B25
straight-6
143 kW (192 hp)
at 6,000 rpm
245 N⋅m (181 lb⋅ft)
at 3,500 rpm
528i1995–1998M52B28
straight-6
142 kW (190 hp)
at 5,300 rpm
280 N⋅m (207 lb⋅ft)
at 3,950 rpm
1998–2001M52TUB28
straight-6
142 kW (190 hp)
at 5,500 rpm
280 N⋅m (207 lb⋅ft)
at 3,500 rpm
530i2000–2003M54B30
straight-6
170 kW (228 hp)
at 5,900 rpm
300 N⋅m (221 lb⋅ft)
at 3,500 rpm
535i1996–1998M62B35
V8
173 kW (232 hp)
at 5,700 rpm
320 N⋅m (236 lb⋅ft)
at 3,300 rpm
1998–2003M62TUB35
V8
180 kW (241 hp)
at 5,800 rpm
345 N⋅m (254 lb⋅ft)
at 3,800 rpm
540i1995–1998M62B44
V8
210 kW (282 hp)
at 5,700 rpm
420 N⋅m (310 lb⋅ft)
at 3,900 rpm
1998–2003M62TUB44
V8
210 kW (282 hp)
at 5,400 rpm
440 N⋅m (325 lb⋅ft)
at 3,600 rpm
M51998–2003S62B50
V8
294 kW (394 hp)
at 6,600 rpm
500 N⋅m (369 lb⋅ft)
at 3,800 rpm
The initial diesel models used the BMW M51 turbocharged straight-6 engine. In 1998, its successor the BMW M57 was introduced in the 530d model, however the BMW M51 engine continued to be used for two more years in the 525td and 525tds models.
BMW M51 straight-6 engine (shown in an E36 3 Series)
In 1999, the M47 four-cylinder turbo-diesel was introduced in the 520d model, which is the only E39 model to use a four-cylinder engine.

Specifications for European models are shown below.

ModelYearsEnginePowerTorque
520d2000–2003M47D20
inline-4 turbo
100 kW (134 hp)
at 4,000 rpm
280 N⋅m (207 lb⋅ft)
at 1,750 rpm
525d2000–2003M57D25
straight-6 turbo
120 kW (161 hp)
at 4,000 rpm
350 N⋅m (258 lb⋅ft)
at 2,000 rpm
525td1996–2000M51D25 UL
straight-6 turbo
85 kW (114 hp)
at 4,800 rpm
230 N⋅m (170 lb⋅ft)
at 1,900 rpm
525tds1996–2000M51D25TU OL
straight-6 turbo
105 kW (141 hp)
at 4,600 rpm
280 N⋅m (207 lb⋅ft)
at 2,200 rpm
530d1998–2000M57D30
straight-6 turbo
135 kW (181 hp)
at 4,000 rpm
390 N⋅m (288 lb⋅ft)
at 1,750 rpm
2000–2003M57D30
straight-6 turbo
142 kW (190 hp)
at 4,000 rpm
410 N⋅m (302 lb⋅ft)
at 1,750 rpm
Manual transmissions
Six-cylinder petrol models were fitted with either the 5-speed Getrag 250G or ZF 320Z (S5-32) transmission, depending on the year and model. Diesel models with the M51 engine were fitted with the 5-speed ZF 260Z transmission, while the M57 diesel models were fitted with the 5-speed ZF 390 (S5-39DZ) transmission.V8 petrol models were fitted with the 6-speed Getrag 420G transmission.
Automatic transmissions
ZF 5HP-30 transmission
Some pre-facelift six-cylinder petrol models were fitted with the 4-speed GM 4L30-E (A4S270R)[39] transmission. All other six-cylinder models were fitted with 5-speed transmissions, either the GM 5L40-E (A5S360R),[39] GM 5L40-E (A5S390R),[39] or ZF 5HP19 (A5S325Z) transmission,[39] depending on the year and model. V8 petrol models were fitted with either the 5-speed ZF 5HP24 (A5S440Z)[39] or the 5-speed ZF 5HP30 (A5S560Z).
Differential ratios
The following differential ratios were used by the E39:

2.81: 540i manual
2.93: 528i/530i manual
3.07: 528iT/530iT manual
3.15: 525i manual, 540i automatic
3.15 (LSD): M5
3.23: 525iT manual
3.46: 525i/528i/530i (5-speed) automatic
4.10: 528i (4-speed) automatic

Steering
Unusually, two different steering systems were used for the E39, depending on the engine. Models with four-cylinder and six-cylinder models use rack and pinion steering,the first time this system has been used in a 5 Series (except for the E34 525iX model). This system steers from the front of the axle.
Models with V8 engines use recirculating ball steering, as per the previous generations of 5 Series.

Chassis and body
Compared with its E34 predecessor, the E39's wheelbase grew by 68 mm (2.7 in) and overall length by 55 mm (2.2 in). Torsional rigidity was increased over the E34 by 40 percent, which reduces body flex and allows the suspension to operate more accurately, also improving ride quality.[43] Structural dynamics were also an objective of the body design, so the body's frequencies for torsional twisting and bending are in separate ranges and above the natural frequency of the body. These frequencies are out of the range of engine and driveline vibrations, to avoid vibrations being amplified.

Due to a stiffer body shell, the weight of the chassis increased by 10 kg (22 lb),which is offset by the reduced weight of some aluminium suspension components. The wagon version was 85 mm (3.3 in) longer than the previous generation (E34) and weighed approximately 40 kg (88 lb) more.
Suspension
The E39 was the first 5 Series to use aluminium for most components in the front suspension. The proportion of chassis components using aluminium significantly increased for the E39.

The front suspension consists of a double-jointed version of the MacPherson strut,with six-cylinder cars using an aluminium front subframe. Aluminium is used for the steering knuckles, outer strut tube and the spring pads, resulting in a weight saving of 21 kg (46 lb).V8 models also use aluminium in the steering box and several suspension links,to compensate for the heavier steel subframe.

The rear suspension consists of a four link design (called "Z-link"), which is similar to the system used by the E38 7 Series. The design minimises unintentional toe angle changes, which increases the stability of the handling.

Wagon self-levelling suspension
The Touring model was the first BMW model to use air suspension (self-levelling suspension was first used by BMW for the E23 7 Series with a closed-loop nitrogen system that operated in parallel with the steel springs).This "self leveling" system controls the ride height of the rear of the vehicle and is designed to keep the center of the wheel a specified distance from the lip of the fender as the weight of the load in the cargo area varies.

Instead of using a traditional coil springs, the system uses pneumatic springs paired with air reservoirs that are pressurised by an air compressor.The system is controlled by two Hall effect sensors at the rear of the vehicle.These sensors tell the EHC (electric height control) if the rear ride height needs to be adjusted and adjust headlight height for vehicles equipped with Xenon headlights.When a door or the rear hatch is opened and then closed the control module will constantly monitor the input signals from the HALL sensors and will activate a correction if the ride height has change greater than 10mm.During normal operation the system stays online but does not adjust to conditions such as potholes.

M5 model
The M5 model of the E39 was introduced in 1998 at the Geneva Motor Show and was produced from 1998 to 2003. It was powered by the S62 V8 engine. All E39 M5 cars were sold in the sedan body style with a 6-speed manual transmission.

Special models
Alpina B10 and D10

Alpina B10 V8
The Alpina B10 3.2, 3.3, V8 and V8S petrol-engined models were built in sedans and wagon body styles based on the E39 from January 1997 to May 2004.
The Alpina D10 was the first diesel model produced by Alpina and was introduced in February 2000. The engine, a 3.0 litre twin-turbocharged unit rated at 180 kW (241 hp) and 500 N⋅m (369 lb⋅ft) of torque, was based on the engine of the 530d model.

Protection line
The 540i Protection light-armored vehicle was launched in Europe in September 1997 and in North America from January 1998.These models included aramid fiber armor, bullet-resistant glass that is coated with polycarbonate to reduce spall. The 540i Protection is rated to withstand the impact of handgun fire up to and including .44 Magnum,the glass is also protected from attack with blunt objects such as baseball bats and bricks.[54] The additional security measures brought an additional weight of 130 kg (287 lb) compared to the normal 540i sedan.on request, an intercom system was available and from January 1998 run-flat tyres were available.
Model year changes
Most changes occur in September each year, when the changes for the following model year go into production, as is typical BMW practice. Therefore, the changes for 1996 represent the 1997 model year, for example.

1996
Station wagon (estate, marketed as "Touring") body style introduced.
525td model introduced.
1997
On-board computer upgraded.
Cornering Brake Control introduced.
Rear side airbags introduced.
1998
M5 model introduced.Lower-body rear side airbags were standard on the M5, remaining optional for other models.
M52 straight-six engines updated to M52TU.
M62 V8 engines updated to M62TU.[58]
530d model introduced, using the new M57 straight-six turbo-diesel engine.
Xenon headlights introduced.
Parking sensors ("Park Distance Control") introduced.
Self-levelling rear suspension introduced for Estate models.
Stability control upgraded (from ASC+T to DSC).
Self-Adjusting Clutch (SAC) introduced on the straight-six petrol engines.
Satellite navigation upgraded from MKI (or Mark I) to MKII.[59][60] Like the MKI, the MKII uses a 4:3 screen and stores the maps on a CD.
1999
Rain-sensing windshield wipers introduced (June 1999)
Front seat airbags upgraded to dual stage
520d introduced, powered by a four-cylinder diesel engine.
525d model (using M57 engine) replaces the 525td model (M51 engine).
2000 facelift
The E39 facelift (also known as LCI) models began production in September 2000 (for the 2001 model year).

520i, 525i and 530i models (using M54 engines) replace the 523i and 528i model (M52TU engines).
530d model receives power increase.
Kidney grilles on all models are changed to those of the M5.
Revised "angel eye" headlights.
Revised tail lights with LED running lights.[64]
Navigation screen updated from 4:3 to larger 16:9 widescreen.
2001
Automatic transmission cars had the manual shift direction switched (to forwards for downshifts, backwards for upshifts).
Automatic headlights introduced.
In-dash CD player becomes standard equipment on all models.(p12)
Power passenger seat becomes standard on 6 cylinder models and automatic climate control becomes standard on 525i.
M Sport package introduced for the 540i
2002
Navigation computer updated to “MKIV” Used 2 DVD maps instead of 8 CDs).
2003
Additional chrome trim added on the trunk (boot) and on the sides of the body.
Country-specific model ranges
Indonesia
In Indonesia, the initial model range in 1996 was the 523i and 528i,with only the 523i available with a manual transmission. Following the September 2000 facelift, the line-up consisted of 520i, 525i and 530i. Indonesian models were assembled in Jakarta from complete knock-down kits.

United States
From 1997–1998, the E39 model range in North America consisted of the 528i and 540i, In 1999 the M5 was introduced along with station wagon (marketed as "sports wagon") versions of the 528iT and 540iT. For the 2001 model year, the 528i was discontinued and replaced by the 525i (525iT in estate/wagon format) and 530i (with no wagon variant in the US).

In 2001, the American market 540i's power output was increased to 216 kW (290 hp),(p12)unlike other markets where the 540i's power remained at 210 kW (282 hp).All North American models from factory arrived pre-wired for mobile phones; it was a dealer option to have a mobile phone installed into the center console. The station wagon models were marketed as "Sports Wagon" and standard features included roof rails for mounting a roof rack.

In 2003 BMW sold the 540i M-Sport package as a limited production model in the United States, with 1,190 cars produced with a manual transmission.Upgrades included 18-inch wheels and various cosmetic features.

Sales in the United States for May 1999 to May 2000 were 19,294 vehicles.The following year, sales for May 2000 to May 2001 were 15,233 vehicles.